esp8266-ch340g驱动 第一个项目 电量LED

[复制链接]
查看: 744   回复: 0

240

主题

240

帖子

1341

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
1341
2023-7-13 19:10:56   显示全部楼层   阅读模式  
1.png

CH341SER (1).zip免费

2023-7-13 21:11上传, 179.66 KB, 下载次数: 146

下载





关于ch340g更多解析 为啥用这个板子 便宜啊


https://blog.csdn.net/weixin_43550752/article/details/116745028

/*
  Blink

  Turns an LED on for one second, then off for one second, repeatedly.

  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
  the correct LED pin independent of which board is used.
  If you want to know what pin the on-board LED is connected to on your Arduino
  model, check the Technical Specs of your board at:
  https://www.arduino.cc/en/Main/Products

  modified 8 May 2014
  by Scott Fitzgerald
  modified 2 Sep 2016
  by Arturo Guadalupi
  modified 8 Sep 2016
  by Colby Newman

  This example code is in the public domain.

  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
*/

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  // digitalWrite(LED_BUILTIN, HIGH);  // turn the LED on (HIGH is the voltage level)
  // delay(1000);                      // wait for a second
  digitalWrite(LED_BUILTIN, LOW);   // turn the LED off by making the voltage LOW
  delay(1000);                      // wait for a second
}


回复

使用道具 举报

您需要登录后才可以回帖   登录 立即注册

高级模式

南通谢凡软件科技有限公司